REMOTE CONTROL BATTERY INSTALLATION
CARE AND MAINTENANCE
Cleaning
Metal:
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
DO NOT
use brass polish or household cleaners as these products will damage the metal trim.
Glass:
Use a good quality glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents:
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
Clean the exterior of the fireplace with a slightly damp cloth or duster.
3
9
STEP 1:
Push down gently and slide back to remove the
Remote Control(D)
battery compartment cover.
STEP 2:
Insert the
2 AAA Batteries(F)
into the battery compartment, ensuring the polarity (+/-)
matches the terminals as indicated in the battery compartment.
STEP 3:
Replace the battery compartment cover.
1
+
+
-
-
2
3
NOTICE
To avoid long term battery leakage and possible damage to the remote-
control unit we recommend removal of the batteries during long periods of
storage or non-use.
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before cleaning,
performing maintenance, or moving this fireplace. Failure to do so could result in
electric
shock
,
fire
, or
personal injury
.
NEVER
immerse in water or spray with water
.
Doing so could result in
electric shock
,
fire
,
or personal injury
.
