PFS200-2
Intelligent FDCIE With AS4428.3-2010 Fascia
Installation and Operation Manual
Page 42
Entering the zone to test in this screen and pressing
ENTER
to confirm, the zone will enter test
mode, and the corresponding ZCP and
TEST MODE
indicators will illuminate.
6.3.7.3 Exiting Single-zone Testing Mode
Entering 3 in the screen of Fig. 6-31 will enter the screen for exiting single-zone test mode, as
shown in Fig. 6-33.
Fig. 6-33
Entering the number of the zone to exit test mode and pressing
ENTER
to confirm will enable
the zone to exit test mode.
6.3.7.4 Exiting Test Mode for All Zones
Entering 4 in the screen shown in Fig. 6-31 will enter the screen for all zones to exit test mode,
as in Fig. 6-34.
Fig. 6-34
The screen will display a prompt before exit. After pressing
ENTER
for confirmation,
TEST
MODE
indicator will go out.
Stop a Zone In Test
Zone: 000
Stop All Zone Test
Press ENTER Confirm
