PFSIFP8
Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 36
resolved.
Disable/Enable operation is available for addressable devices and zones. Local output
ports can also be regarded as addressable devices by setting their zone number and
device number as “0”. In the following paragraphs, operation on addressable devices
will be demonstrated as an example.
FAR:OK FPE:DIS Commission 20:44:30
*******************************************
*DISABLE/ENABLE*
1.DIS/ENABLE DEVICE
2.DIS/ENABLE ZONE
Fig. 6-18
Choosing “1” on the screen in Fig. 6-18 enter the screen for disabling or enabling
devices. The operation is shown in Fig. 6-19.
Fig. 6-19
6.3 Instructions for System Administrator (Manager Password
Required)
Choosing
SYSTEM
SETUP
when the FACP is in normal standby state and entering
manager password can enter system setting screen. The screen is shown in Fig. 6-20.
Summary of Contents for PFSIFP8
Page 1: ......
