PFSIFP8
Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 1
Installation Precautions
Adherence to the following will aid in problem-free installation with long-term reliability:
Do not attempt to install, service, or operate this unit until this manual is read and
understood.
This equipment must be installed in accordance with these instructions and the
appropriate national, regional and local regulations specific to the country and
location of the installation. Consult with the appropriate Authority Having
Jurisdiction (AHJ) for confirmation of the requirements.
PFSIFP8 Fire Alarm Control Panel (FACP) shall only be installed and serviced by a
trained specialist.
Disconnect all sources of power before servicing. The control unit and associated
equipment may be damaged by removing and/or inserting cards, modules, or
interconnecting cables while the unit is energized.
Remove all electronic assemblies prior to any drilling, filing, reaming, or punching
of the enclosure. When possible, make all cable entries from the sides or rear.
Before making modifications, verify that they will not interfere with battery,
transformer, and printed circuit board location.
Summary of Contents for PFSIFP8
Page 1: ......
