14
|
Page
EXTERNAL TEMPERED GLASS REMOVAL
–
DOUBLE GLASS FIREPLACE
Follow the procedure below to remove and install back the fireplace external glass (double glass fireplace configuration).
Note: Suction cups are needed to remove the glass.
Warning!
Turn off the fireplace and allow time for the unit to cool before proceeding.
Caution:
The glass is very fragile and should be handled with care.
Warning! Double glass fireplace should NOT be operated without the external glass.
●
Confirm lock screws have been removed during install (should be done once, during install only).
●
Attach
glass suction cups to the glass. Use more than one suction cup if needed (any unit above 45”).
●
Using suction cups, slightly push in the external glass top edge.
●
Once glass has been pushed, slightly lift the glass to clear bottom part of the glass.
●
Remove the glass and place in a secure location.
Install back external glass.
●
Attach glass suction cups to the glass. Use more than one suction cup if needed (any unit above 45”)
●
Place upper edge of the glass in position and push latching trim.
●
Once trim has been pushed in, slide glass top in position.
●
Tilt in bottom edge of the glass in position as you are lifting the glass up.
●
Glass is now secure in place. No bolts are needed to lock the glass.
