56
|
Page
ADDING THE FLARE FIREPLACES DE -RATING REDUCER
Add the de-rating reducer when your fireplace is being installed at elevations over 4500 ft above sea level.
Please contact your local gas supplier for de-ration requirements in your area.
1.
Shut off gas, remove power, and locate
your gas valve. Once disconnected, verify
direction of gas flow by locating the flow-
arrow on top of the valve. Turn off gas and
remove hard line to valve.
SEE EXAMPLE 1
2.
Add reducer between gas hard line and
flex line connected to Honeywell valve
on the burner side. Us appropriate reducer as specified in “
DE-RATE TABLE
”.
Pilot Gas
Pilot GND
Module GND
Outlet
gas
Inlet gas
Inlet gas pressure
Outlet gas pressure
Valve components