90
|
Page
ELECTRIC AND CONTROL
ELECTRIC DIAGRAM - SCREEN
Using One Electrode Pilot
To wire this up, one wire runs from the Igniter to the module SPARK terminal. The black jumper
connected to the SENSE terminal remains connected.
-
Hard wire 3-way connector wires between valve and control module according to labeling. IE:
PV to PV,
PVMV to PVMV, MV to MV, GND(Module) to GND mark (Valve),
-
24vac which is came from the transformer are connected to the
24VGND and TH-W,
-
transformer is connected to the 110 AC (by home socket or by control system)
Figure SEQ Figure1: overall connection between the pilot, valve, and module
