10
PC Card Insertion and Removal
Insertion
To insert the PC card into your Pocket PC:
1. If the PCMCIA jacket accessory is not already attached, slide the Pocket PC
bottom first into the jacket. It should click into place.
2. Attach the antenna to the copper circle connector on the end of the PC
1000. Do not force.
3. With the label facing towards the front of the Pocket PC , insert the network
card into the slot at the top of the jacket.
Removal
To remove the PC 1000 card:
Use the Ejector to remove the PC 1000 card
To uninstall Flarion Mobile Manager software from the mobile device, go to
Settings/Remove Hardware, highlight FT1000 and click
Remove.