input of the following fixture and so on.
3.6 orientation
This fixture may be mounted in any position provided there is adequate room for
ventilation.
4. Operating instructions
4.1 Navigating the control panel
Access control panel functions using the four panel buttons located directly under the
LCD Display.
. When a menu function is selected, the display will show immediately the first available
option for the selected menu function. To select a menu item, press<ENTER>.
Press the <MENU> button repeatedly until you reach the desired menu function. Use
the <UP> and <DOWN> buttons to navigate the menu options. Press the <ENTER>
button to select the menu function currently displayed, or to enable a menu option. To
return to the previous option or menu without changing the value, press the <MENU>
button.
No alteratived worth that return re-option or menu , press(MENU)button
4.2 Menu map
RPON
(address code setting from A001-------A512)
AU01
(auto-moving speediness)
AU02
(slow speed auto-moving)
SN01
(Sound control for color changing)
SN02
( Sound control for strobe)
RPOF
(Set pan to
forward-rotating
)
RPON
(Set pan circumrotate reverse)
RTOF
(Set tilt to
forward-rotating
)
RTON
(Set tilt circumrotate reverse)
RDOF
(set the LED readout to non-inverting)
RDON
(Set the LED readout to inverting)
DFON
(Default output setting)
Note
：
：
：
：
output default setting address code is A001, pan is positive circumrotate
、
、
、
、
tilt
is positive circumrotate
、
、
、
、
LED positively reveal.
4.3 User configurations
Setup single-desk light`s autocephaly moving mode(auto-running)
.
Press the
MENU
until it shows
AU01
.
Use the
UP/DOWN
buttons to set to
AU01
or
AU02 ,
Press
ENTER
to confirm.
Button
Function
<MENU>
Used to access the menu or return to a previous
menu option.
<DOWN>
Scrolls through menu options in descending
order.
<UP>
Scrolls through menu options in ascending order.
<ENTER>
Used to select and store the current menu or
option within a menu.
