Flash-e-Vapor V4.5/V4.5L
—
Instruction
manual
english
5
Technical data V4.5/V4.5L
Diameter:
23mm
Length (without drip tip):
60mm / 76mm
Weight (empty):
95g / 100g
Capacity:
approx. 6ml / 9ml
elecr. threaded connection: 510 (adjustable)
Material:
Stainless steel
Borosilicate 3.3 glass
POM (Polyoxymethylen)
PC (Polycarbonate)
PEEK (Polyetheretherketone)
Cleaning - Flash-e-Vapor V4.5/V4.5L
The tank parts and the evaporation chamber of your Flash-e-Vapor
V4.5/V4.5L can be cleaned in an ultrasound bath.
The socket is tightly screwed in place but should not be put into the
ultrasound bath in order to retain its tightness.
It is usually sufficient to clean the parts of the Flash-e-Vapor V4.5/V4.5L under
warm running water using a brush (e.g. toothbrush) and some detergent.
Afterwards, rinse well under running water and dry all parts well.
In order to make the assembly easier and to increase the life of the O-rings,
we would recommend moistening them with a little bit of liquid.
