Flash-e-Vapor V4.5/V4.5L
—
Instruction
manual
english
7
Cutting and inserting wicks (cotton cord)
Wind the socket of your Flash-e-Vapor V4.5/V4.5L.
Cut two wicks of approx 10mm from the included
cotton cord.
Attach the evaporator chamber to the socket.
Make sure that the guide pin of the socket is inserted
into the groove of the evaporator chamber. Now insert
the two wicks into the wick holes of the evaporator
chamber and slightly press down until they rest on the
wick.
Now cut the projecting part of your wicks flush with
the evaporator chamber using scissors or a wire cutter.
Moisten the wicks with a little bit of liquid to ensure
the immediate functioning of the wicks. Screw the
socket with the evaporator chamber to the filled tank.
