www.flash-butrym.pl
2
1
INTRODUCTION
Thank you for purchasing LED Moving Head 4x15W RGBW 4in1 ZOOM. For safety reasons and to ensure
the trouble-free operation, carefully read the instructions.
2
SAFETY INFORMATION
1.
Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2.
Disconnect the power supply before installation.
3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
The device must be installed on stable structures
3
PRODUCT INFORMATION
A small moving head with four powerful LEDs and a unique (for this size) ZOOM function. The ability to
control the width of the light beam in combination with the smooth rotation in two axes in the range of 540°
/ 270° makes this device convenient and versatile for small stages applications and in clubs or theaters. The
head is also well suited to the difficult to access places, where it is necessary to have full control of the light
without the possibility of adjusting the physical parameters of the device.
3.1
Specification
Power consumption: 65W
Power supply voltage: 95 - 240V
Voltage frequency: 50/60Hz
Diode type: 4in1
Number of diodes: 4
Diode power: 15W
Display: LED - 4 characters
Color: RGBW
Beam angle (min): 10°
Beam angle (max): 60°
Dimming: Linear: 0 - 100%
Flash frequency (min): 0Hz
Flash frequency (max): 12Hz
PAN range: 540°
TILT range: 270°
Number of DMX channels: 10 / 12 / 15
DMX standard: DMX 512
Control interface: 4 buttons
Operating modes: DMX, Automatic, Sound controlled, Master/Slave
AC IN: IEC - C14
AC OUT: IEC - C13
DMX IN: XLR - 3 pin
DMX OUT: XLR - 3 pin
