ENTER End
*/
$
%
ENT
*
*
ZEND
*
167
9-4-2 Sub Code ID Setting
Under the circumstances list below, the “Sub Code ID” will substitute with
“Code ID”.
1. ”
Expansion
” for UPC-E is set as ”
Enable
”
2. ”
ISBN/ISSN Conversion
” for EAN-13 is set as ”
Enable
”
3. ”
Expansion
” for EAN-8 is set as ”
Enable
”
4. ”
Code 32 translation
” for Code-39 is set as ”
Code-32
” or ”
Code-32 with’A’
,
and “
Type
” for
Full ASCII
.
5. ”
Type
” for Code-128 to be set ”
UCC-128
”
It will be prefixed in front or behind the barcode data (Code ID Position can be
configured). There are some symbologies (i.e. EAN-8) include 2 Sub Code ID.
If your application needs Sub Code ID, please enable the “Transmission Code
ID” function.
Please refer” ASCII
Code Table”
2 digits
Please refer to 8-1
section for default
value.
*
B
14
B
*
Sub Code ID for UPC-E
*
C
14
B
*
Sub Code ID for EAN-13
*
D
14
B
*
Sub Code ID for EAN-8
*
E
14
B
*
Sub Code ID for Code-39
*
F
14
B
*
Sub Code ID for Code-128
9. Output Format Setting
9 - 4 -2 Sub Code ID Setting
Configuration
Max. Configurable Length
Default Setting
