28
4-2-2 LED indication under Bluetooth Mode
4. Memory / Bluetooth Mode
4-2-2 LED indication under Bluetooth Mode
4-2-2 LED indication under Bluetooth Mode
Status
Description
Red
ON
When
scan key
is pressed, if red LED is ON, this means the
power is low and needs to be recharge soon.
Orange
&
Green
Green LED
Flashing
When
scan key
is pressed, and the green LED is blinking, this
means the barcode scanning function is ready.
Orange LED
Flashing
To disconnect the Bluetooth connection, press the
delete key
for 3 seconds until the orange LED turns from steady to
blinking
. With this action, the power will also be shut down.
To power on the scanner, press
scan or delete key
again
Orange LED
ON
When scanner is set as iPad OSK mode and the connection
with iOS is successful, press the
delete key (once)
to enable or
disable the virtual keyboard in iOS.
Blue
Flashing
Under Bluetooth mode, and Bluetooth connection is not yet
connected, the blue LED indicator will be flash per 3 seconds.
Under Bluetooth Mode and if Bluetooth connection is not
connected,
Press and Hold the
delete key
until BLUE LED
indicator flashing rapidly, at this time, release the delete key for
Bluetooth pairing with your device.
ON
When power on and if Bluetooth is connected, the blue LED
will be on.
