44
5-1-1 Receiving barcode data by HYPER TERMINAL (Slave mode)
Hyper Terminal COM port selection in Slave Mode:
Execute “Hyper Terminal” and set the connection as “Outgoing COM
port (COM5)”. Please refer to the screen below.
COM port setting: Baud rate: 115200, Data bits:8 bits, Stop Bits: 1 Bits, Parity:
None.
After specified the COM port, select
“OK”
button for connection. When the connection
succeeded, it will indicate with a beep
sound.
When configuration with hyper terminal succeeded, it
is ready to receive the barcode data from scanner.
5-1-1 receive barcode data by WINDOWS HYPER TERMINAL in slave mode
5. Bluetooth Connection Mode Instruction
5-1-1 receive barcode data by WINDOWS HYPER TERMINAL in slave mode