50
5.3 Econnect Bluetooth Dongle Mode I Connection(USB-HID / USB COM)
5-3-1 HID mode
Make sure the scanner is in Bluetooth mode; please refer to chapter
4-2-1 for how to configure in Bluetooth mode.
Make sure the Mode selection code is configured as “2”. Please refer
to chapter 4-2-4-3.
When Bluetooth Connection established, execute any word processing
software, for example: Word, notepad, Excel and etc. to receive to
barcode data.
When connecting scanner and Bluetooth Dongle,
Press and hold the Pairing/delete (small) key until blue
LED flashing rapidly, and then release it. The scanner
will establish the Bluetooth connection. If connection
successful, the Blue LED indicator will be on. If not,
please repeat the above mention action or check the
Bluetooth parameters setting.
Insert Econnect Bluetooth Dongle to PC.
5- 3 Econnect Bluetooth Dongle Mode I Connection
(USB-HID / USB COM)
5-3-1 HID MODE:
5. Bluetooth Connection Mode Instruction
Insert Econnect Bluetooth Dongle to PC.
5- 3 Econnect Bluetooth Dongle Mode I Connection
(USB-HID / USB COM)
5-3-1 HID MODE:
Insert Econnect Bluetooth Dongle to PC.
5- 3 Econnect Bluetooth Dongle Mode I Connection
(USB-HID / USB COM)
5-3-1 HID MODE: