ENTER End
*/
$
%
ENT
*
*
ZEND
*
95
7-2-2 Virtual Com Type
7-2-2-1 Virtual Com
With USB- COM type, user needs to use terminal software to receive the
barcode data.
*
Z
232
*
(1) Scan “Enter” Barcode
(2) Scan “Virtual Com Default” Barcode
7-2-2-2 Transmission gap
This is the delay time setting between each barcode data characters. If the
delay time setting is too high, the application program may not be able to
receive all the barcode data characters due to transmission speed.
*
2052
*
0 ~ 0.25 sec
0.001 sec
0
(A) Scan “Enter” barcode
(B) Scan Transmission gap barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 0.02 sec, the
parameter value is
0.02 sec / 0.001
sec = 20
7. General Configuration Setting
7-2-2 Virtual Com Type
Procedure:
Configuration Range
Unit
Default Setting
Procedure:
Example:
