DMX
Controller
DMX 512
DMX 512
LED DERBY LASER RG + LED
•
Art No F7300247
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit’s
5.1 Connecting DMX signal
The connection is performed using cable
with XLR-female -> XLR-Male plugs.
4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
when installing the fixture. The equipment
must be fixed by professionals. And it must
be fixed at a place where is out of the touch
of people and has no one pass by or under
it.
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3(5)-pin socket
2. Power (in/out): powerCON socket
1
3
2
2
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!
At the last fixture, the
DMX signal has to be terminated with a
terminator. Solder a 120Ω resistor between
signal (-) and signal (+) into a XLR plug and
plug it in the DMX output of the last fixture.
1
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
4
5
3-pin XLR
5-pin XLR
Power supply voltage: 110-240V
(50/60Hz)
Power consumption: 30W
Number of diodes: 9
Color: RGB
Beam angle (min/max): 6
DMX standard: DMX 512
Control interface: 4 buttons
Operating modes: Operation: Auto,
DMX512,Sound, Master/Slave
Additional information: Laser Effect: Red
120mW & Green 30mW
DMX IN/OUT: XLR - 3 pin
IP Rating: IP20
Housing made: Steel
Dimensions: 18,5x16,2x21 cm
Weight: 1,48 kg
Type of packaging: Carton Box
