www.flash-butrym.pl
4
5.2
Voltage specification
Input Voltage
Total Power
Frequency
100~240V
70W
50/60Hz
5.3
Connecting power supply
The connection is performed using power cable with IEC C14 connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
6
OPERATION MANUAL
6.1
Control panel
The control panel is equipped with 4-digit display and 4 control buttons with the following functions:
1.
MENU – choose function
2.
DOWN – change value
3.
UP – change value
4.
ENTER – confirm changes
6.2
Menu
Menu diagram:
DMX 8 CH mode: set channel
DMX 5 CH mode: set channel
Slave mode
Smooth color change: set speed
Color change: set speed
Pulse color change: set speed
Strobe: set speed
Manual color: set RGBW values
Demo
Sound control mode
