www.flash-butrym.pl
2
1
INTRODUCTION
Thank you for purchasing LED BALL Moving Head 12x15W 4in1. For safety reasons and to ensure the
trouble-free operation, carefully read the instructions.
2
SAFETY INFORMATION
1.
Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2.
Disconnect the power supply before installation.
3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
The device must be installed on stable structures
3
PRODUCT INFORMATION
3.1
Specification
Power consumption: 150W
Power supply voltage: 110 - 220V
Voltage frequency: 50/60Hz
Diode type: 4in1
Number of diodes: 12
Diode power: 12W
Display: LCD Matrix
Color: RGBW
Beam angle (min): 3°
Beam angle (max): 3°
Dimming: Linear: 0 - 100%
Flash frequency (min): 1Hz
Flash frequency (max): 20Hz
PAN range: 540°
TILT range: No limit
Number of DMX channels: 12 / 20 / 56
DMX standard: DMX 512
Control interface: 4 buttons
Operating modes: DMX, Automatic, Sound controlled, Master/Slave
AC IN: IEC - C14
DMX IN: XLR - 3 pin
DMX OUT: XLR - 3 pin
IP Rating: IP20
Housing made: ABS
Cooling: Active
Weight [kg]: 8
Weight with packaging [kg]: 10
