www.flash-butrym.pl
2
1
INTRODUCTION
Thank you for purchasing 2x LED Moving Head BIG EYE CASE. For safety reasons and to
ensure the trouble-free operation, carefully read the instructions.
2
SAFETY INFORMATION
1.
Installation should be done by qualified personnel in order to minimize the risk of
accidental electric shock
2.
Disconnect the power supply before installation.
3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect
the device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
The device must be installed on stable structures
3
PRODUCT INFORMATION
3.1
Specification
Power consumption: 240W
Power supply voltage: 95 - 240V
Voltage frequency: 50/60Hz
Diode type: 4in1
Number of diodes: 19
Diode power: 15W
Display: LCD Matrix
Color: RGBW
ZOOM: Yes
Beam angle (min): 4°
Beam angle (max): 60°
Dimming: Linear: 0 - 100%
Flash frequency (min): 1Hz
Flash frequency (max): 20Hz
FROST filter: No
FOCUS: No
PAN range: 540°
TILT range: 210°
Number of DMX channels: 17/32/89
DMX standard: DMX 512
Control interface: 4 buttons
Operating modes: DMX512, Auto, Sound-controlled, Master / Slave, Manual color
AC IN: powerCON
AC OUT: powerCON
DMX IN: XLR - 3 pin
DMX OUT: XLR - 3 pin
IP Rating: IP20
Housing made: ABS