LED Moving Head 19x15W RGBW ZOOM
•
Art No F7100521
Installation should be done by qualified
personnel in order to minimize the risk of
accidental electric shock
Disconnect the power supply before
installation.
Before connecting the unit to the mains,
make sure it is not damaged mechanically.
If you notice any signs of damage you
should contact your dealer immediately. Do
not connect the device to the mains.
Do not use the device in high humidity
conditions and at temperatures above 40° C
To avoid damage please don’t use organic
solvents to clean the fixture shell.
The device must be installed on stable
structures
It should be installed in a well-ventilated
place, at a distance of 15cm or more from the
walls. Please check if the fan and ventilation
holes are unobstructed.
2. SAFETY INFORMATION
1. INTRODUCTION
Thank you for purchasing
LED Moving Head 19x15W RGBW ZOOM
.
For safety reasons and to ensure the trouble-free operation, carefully read
the instructions.
Power consumption: 250W
Power supply voltage: 90 - 240V
Voltage frequency: 50/60Hz
Diode type: 4in1
Number of diodes: 19
Diode power: 15W
Display: Color LCD
Color: RGBW
ZOOM: YES
Dimming: Linear: 0 - 100%
Flash frequency (min): 1Hz
Flash frequency (max): 25Hz
PAN range: 540
°
3. PRODUCT INFORMATION
TILT range: 270
°
Beam angle (min): 6
°
Beam angle (max): 60
°
Number of DMX channels: 16/24
DMX standard: DMX 512
Control interface: 5 buttons
AC IN: powerCON
AC OUT: powerCON
DMX IN: XLR - 3 pin
DMX OUT: XLR - 3 pin
IP Rating: IP20
Housing made: ABS
Cooling: Active
After removing the packaging, check
if the device was not damaged during
transport. Before connecting to the
mains, make sure that the device is
securely mounted. The manufacturer is
not responsible for damage caused by
unstable mounting.
4. INSTALLATION
Ensure proper connection to the mains
and proper grounding. Make sure that
the electrical parameters are consistent
with device requirements. All activities,
including connecting the device to the
mains must be performed by qualified
personnel.
