LED Double Derby 2x10W RGBW 4in1 F7300228
www.flash-butrym.pl
3
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
5
CONNECTIONS
The device is equipped with the following interfaces:
1.
DMX IN/OUT: XLR 3-pin socket
2.
Power (in): IEC-C14
5.1
Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.
5.2
Voltage specification
Input Voltage
Total Power
Frequency
90~240V
30W
50/60Hz
5.3
Connecting power supply
The connection is performed using IEC- C13 power cable.
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
6
OPERATION MANUAL
6.1
Control panel
The control panel is equipped with LED- 4 characters display and 4 control buttons:
1.
MENU
2.
DOWN
3.
UP
4.
ENTER
1
2
3
1
2
3
GROUND
DMX +
DMX -
FEMALE
XLR
MALE
XLR
