O S T R Z E Ż E N I E !
WAŻNE!
Nie kieruj silnego strumienia świetlnego z innych
urządzeń, ponieważ intensywne oświetlenie może
uszkodzić wyświetlacz.
Rysunek 2.
Soczewki mogą skupiać światło słoneczne i silne światło, stwarzając ryzyko pożaru i
uszkodzenia urządzenia. W razie potrzeby należy osłonić lub zasłonić głowę.
User Manual
•
Instrukcja Obsługi
Attention
1. This system only support FAT32 file
system, if use a new SD Card, first
formatted as FAT32 format.
2. This system only support short file name,
file name(including folder name) maximum
of 8-bit file name and 3-bit extend name, file
name and extend name composed by letters
numbers and underscores. File name can’t
surpass 8-bit, without Chinese characters,
if not system can’t identification.
3. SD Card need profile card private, don’t
mixed store with other file, maximum can
support 100 folder, every folder maximum
can store 255 file.
4. Program list: User can use Text editor
(Notepad) edit program list, its extend
name is .PRG.
Program list composed by play file name
play speed play time, the middle with “ , ”
separated. Every line edits one program
item. For example one program composed
by three files file1.ild file2.ild file3.ild., File1.
ild pay speed is 12K, repeat play three times,
file2.ild play speed is 20K, play one time,
file3.ild play speed is 18K, play four times.
So prg1.prg content as follows:
File1.ild, 12, 3
File2.ild, 20, 1
File3.ild, 18, 4
When create one folder, need to create a
folder under the file folder with the same
name as the PRG file, and put the folder in
all the required documents to the PRG file
editing, at this time edited play speed is the
play speed of “Key seek” mode, for example,
blow aurora folder create one aurora.prg
file,.
After add ILDA file, need add this file to prg
file, in order to correctly find this file when
we select play file on the keyboard, and play
the file with you required speed.
5. This system support file is standard ILDA
format file, that is meaning extend name is
ILD file.
Color setting:
Standard color is RG, but you can set the color as green, RG or RGB as following:
Turn off the power, setting address as 3, 5, 7, 9, 10 then short off the outlet (short off one outlet
is single color, short off two outlets is RG, short off 3 outlets is RGB), then turn on the power,
light flash means setting success, then turn off the power and restart machine.
