DE
SYSTEM START
Inserting the battery into the holder starts
the initial measurement on the handle and wheels.
Attention:
During the initial measurement the
sensor handle must not be touched and the wheels
must stand still (duration 6 seconds)
All LEDs on the handle flash. Duration approx 6 seconds.
The Flat Cat then switches to standby (LEDs are off) - by pressing the on/off button, the Flat Cat goes into
operation.
The initial measurement (calibration) of the sensor handle when connecting the battery is only started when
the handle is in the correct driving position.
Front wheel - straight running
Trolley moves to the left:
Turn the screw counter clockwise.
Trolley moves to the right:
Turn the screw clockwise.
Depending on the shape of the bag, the cushion of the bag support can be changed.
Suitable for cart bags.
Suitable for stand bags.
BAG HOLDER
Parking brake (3-wheel only):
Operate with foot.
EN
