Flavel FWMI721, Operating Instructions Manual

19 / EN

Washing Machine / User’s Manual

Rinse hold

If you are not going to unload your clothes 

immediately after the programme ends, you can use 

rinse hold function to keep your laundry in the final 

rinsing water in order to prevent them from getting 

wrinkled when there is no water in the machine. 

Press Start/Pause button after this process if you 

want to drain the water without spinning your 

laundry. Programme will resume where it left off, 

drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust 

the Spin Speed and press Start/Pause button. 

Programme will resume. Water will be drained, 

laundry will be spun and the programme will end.

C

INFORMATION

•  If the programme has not reached the spin 

step, you can change the spin speed without 

switching the machine to Pause mode.

4.3.10 Auxiliary function selection

Select the desired auxiliary functions before 

starting the programme. You can also select 

or cancel auxiliary functions suitable for the 

running programme without pressing the Start/

Pause button while the machine is operating. 

To do this, the machine must be in a step 

before the auxiliary function you are going to 

select or cancel. If the auxiliary function cannot 

be selected or cancelled, light of the relevant 

function will flash 3 times to warn the user.

C

INFORMATION

•  If a second auxiliary function conflicting 

with the first one is selected before starting 

the machine, the function selected first 

will be cancelled and the second auxiliary 

function selection will remain active.

•  An auxiliary function which is not compatible 

with the programme cannot be selected. 

(See "Programme and consumption table")

•  Auxiliary Function buttons may vary 

according to the model of the machine.

4.3.10.1 Auxiliary functions

•

 Prewash

A Prewash is only worthwhile for heavily soiled 

laundry. Not using the Prewash will save 

energy, water, detergent and time.

C

INFORMATION

•  Prewash without detergent is 

recommended for tulle and curtains.

• 

Quicker Wash

When this function is selected, durations of 

relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, 

high mechanic activity and optimum water 

consumption, high washing performance is 

achieved in spite of the reduced duration.

•

 Extra 

Rinse

This function enables the machine to carry 

out another rinsing cycle in addition to the 

one carried out after the main wash. Thus, the 

risk for sensitive skins (babies, allergic skins, 

etc.) to be effected by the minimal detergent 

remnants on the laundrwy can be reduced.

4.3.10.2 Functions/Programmes 

Selected by Pressing the Function 

Buttons for 3 Seconds

• Drum Clean 

To select this programme, press and hold the 

auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean 

the drum and ensure the required hygiene is 

provided. Run the programme while the machine 

is totally empty. To obtain better results, put 

powder lime-scale remover for washing machines 

into the detergent compartment no. “2”. When 

the programme is over, leave the loading door 

ajar so that the inside of the machine gets dry.

C

INFORMATION

•  This is not a washing programme. 

It is a maintenance programme.

•  Do not run this programme when there are 

any objects in the machine. If you try to do 

so, the machine will automatically detect that 

there is load inside and abort the programme.