Flavel FWMI721, Operating Instructions Manual

21 / EN

Washing Machine / User’s Manual

Changing the delayed end time

If you want to change the time during countdown: 

Turn the programme selection knob to cancel the 

delayed end time function, and then set the desired 

time again.
1.  Press the End Time Adjustment button. When 

pressed for the first time, the programme 

duration will be rounded up to the closest 

whole number time. Each following press will 

increase the time by an hour.

2.  If you want to decrease the delayed end 

time, press the End Time Adjustment button 

consecutively until the desired time is displayed.

Cancelling the delayed end function

If you want to cancel the delayed end time 

countdown and start the programme immediately:
1.  Set the Programme Selection knob to any 

programme. This way, the Delayed End time 

will be cancelled. The End/Cancel light will 

flash continuously. 

2.  Then, select the programme you want to run 

again.

3.  Press Start/Pause button to start the programme.

4.3.12 Starting the programme

1.  Press Start/Pause button to start the programme.
2.  Programme follow-up light showing the 

startup of the programme will turn on.

C

INFORMATION

•  If no programme is started or no key is 

pressed within 10 minutes during the 

programme selection process, the display 

lights will go off. Once the Programme 

Selection knob is turned or any button is 

pressed, display lights will turn on again.

4.3.13 Progress of programme

Progress of a running programme can be 

followed from the Programme Follow-up 

indicator. At the beginning of each programme 

step, the relevant indicator light will turn on.

C

INFORMATION

•  If the “Anti-” auxiliary function 

has been selected, “End” LED and “Anti-

” LED will be on at the same 

time while this step is continuing.

•  To end the programme while the “Anti-

” step is running, simply press any 

button or turn the programme selection knob.

You can change the auxiliary functions, speed 

and temperature settings without stopping the 

programme flow while the programme is running. 

To do this, the change you are going to make 

must be something that will be carried out after 

the programme step that is running. If the change 

is not suitable, relevant lights will flash 3 times.

C

INFORMATION

•  If the machine does not proceed to the 

spinning step, the Rinse Hold function 

might be active or the automatic 

unbalanced load detection system might 

be activated due to the unbalanced 

distribution of the laundry in the machine.

4.3.14 Loading door lock

There is a locking system on the loading door of 

the machine that prevents opening of the loading 

door in cases when the water level is unsuitable.
Loading door light will start flashing when the 

machine is switched to Pause mode. The machine 

checks the level of the water inside. If the level is 

suitable, the loading door light will turn off and the 

loading door can be opened within 1-2 minutes.
If the level is unsuitable, the loading door light 

will remain on and the loading door cannot be 

opened. If you are obliged to open the loading 

door while the Loading Door light is on, you 

must cancel the current programme. See 

"Cancelling the programme"