33
TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)
Document Code
Rev.
Date saved
Date printed
U300 INSTRUCTIONS
01
09/02/2016
09/02/2016
EN
"x+#+")$#&+;&#$&$#!)
stopper
A
Interchangeable rubber stoppers:
Soft (blue)
Medium (yellow)
Hard (black)
B
Single stopper holder
C
Magnetic stopper holder
D
Magnetic support
E
Round magnetic felt stopper.
2. To replace the single stopper holder (B, C or D) with the magnetic
one, you must unscrew the screw (H) which secures it to the
rod and pull it downwards and out.
1. To adapt the position of the stopper (A) to the thickness of the
frame, proceed as follows:
a. Pull the click knob out.
b. Lift or lower the punched rod based on requirements.
c. Release the click knob to block the column.
3. Fasten the magnetic support (D) or the single stopper holder (B)
to the rod clamp by tightening the relative socket head screws
(H).
4. If you are using the magnetic support (D) attach the magnetic
stopper holder (C) or the round felt stopper (E) to the magnet.
B
A
C
E
D
3
H
1
H
2
H
H
4
