28
TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)
Document Code
Rev.
Date saved
Date printed
U400 INSTRUCTIONS
01
02/10/2015
02/10/2015
EN
#++\+#$$*#"
To use V-nails of a different size it is necessary to take the loader out of the magazine and change it .
This is carried out in the following simple steps:
1. Turn the PLV valve (1) to the OFF position to open the V-nail
pusher
3. Press the red button to move the carriage beyond the upper
travel stop.
5. Keeping it at a slight tilt, insert the new loader in the magazine,
then press down.
2. If necessary, to get over the locking knob on the mobile fence,
lift the vertical clamp stopper by pulling on the click knob.
4. Take the loader out.
6. Press the loader home until it is completely locked in place.
7. Lift the knob to release the carriage.
8. Press the red button to take the carriage back within the travel
stop limit then reposition the vertical clamp stopper.
2
3
4
5
6
7
8
1
