CHE 2-28
12
Contents
Symbols used in this manual . . . . . . . . . 12
Technical specifications . . . . . . . . . . . . 12
Overview . . . . . . . . . . . . . . . . . . . . . . . . 13
For your safety . . . . . . . . . . . . . . . . . . . 14
Noise and vibration . . . . . . . . . . . . . . . . 15
Instructions for use . . . . . . . . . . . . . . . . 16
Maintenance and care . . . . . . . . . . . . . . 19
Disposal information . . . . . . . . . . . . . . . 20
-Declaration of Conformity . . . . . . . . 20
Exemption from liability . . . . . . . . . . . . . 20
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE!
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Use light-weight breathing
protection!
Disposal information for the old
machine (see page Disposal
information)!
Technical specifications
Hammer drill and chisel
hammer
CHE 2-28
SDS-plus
Rated power
W
800
No-load speed
min
-1
0–1300
No-load impact rate
min
-1
0–4000
Max. single impact energy
(according to “EPTA-
procedure 05/2009”)
J
2.7
Lubrication
Grease
Tool holder
SDS-plus
Max. drill diameter
– Concrete
– Masonry
(HM drill bit)
– Wood
– Metal
mm
mm
mm
mm
28
68
30
13
Weight according
to “EPTA Procedure
01/2003”
kg
2.65
