background image

RS 29 18.0

19

Clean the power tool and ventilation slots at 

regular intervals. Frequency of cleaning is 

dependent on the material and duration of 

use.

Regularly blow out the housing interior 

and motor with dry compressed air.

Charger

WARNING!

Before performing any work on the charger, 

pull out the mains plug. Do not use water or 

liquid detergents.

Remove dirt and dust from the housing 

with a brush or a dry cloth.

Gear

NOTE!

Do not loosen the screws on the gear head 

during the warranty period. Failure to 

comply with this requirement will invalidate 

any claims under the manufacturer's 

warranty.

Repairs

Repairs may be carried out by an authorised 

customer service centre only.

Spare parts and accessories

NOTE!

Use only original parts supplied by 

the manufacturer for replacement 

purposes. The use of non-original parts will 

invalidate any claims under 

the manufacturer's warranty.

For other accessories, in particular cutting 

accessories, please refer to 

the manufacturer’s catalogues.

Exploded drawings and spare-part lists can 

be found on our homepage: 

www.flex-tools.com

Disposal information

WARNING!

Render disused power tools unusable by 

removing the power cord.

EU countries only.

Do not throw electric power tools into 

the household waste!

In accordance with the European Directive 

2012/19/EC on Waste Electrical and 

Electronic Equipment and its incorporation 

into national law, used electric power tools 

must be collected separately and recycled in 

an environmentally friendly manner.

Raw material recovery instead of 

waste disposal.

 

Device, accessories and packaging should 

be recycled in an environmentally friendly 

manner. Plastic parts are identified for 

recycling according to material type.

WARNING!

Do not throw batteries into the household 

waste, fire or water. Do not open used 

batteries.

Batteries should be collected, recycled or 

disposed of in an environmentally friendly 

manner.

EU countries only:

In accordance with Directive 2006/66/EC 

defective or used batteries must be 

recycled.

NOTE!

Please ask your dealer about disposal 

options.

Akku-Säbelsäge RS 28-18.0.book  Seite 19  Freitag, 3. Juli 2015  2:41 14

Summary of Contents for RS 29 18.0












Reviews: