XFE 7-15 125 / XFE 7-15 150 / XCE 10-8 125
13
Contents
Symbols used in this manual . . . . . . . . 13
Symbols on the power tool . . . . . . . . . . 13
For your safety . . . . . . . . . . . . . . . . . . . 13
Noise and vibration . . . . . . . . . . . . . . . . 15
Technical specifications . . . . . . . . . . . . 16
Overview . . . . . . . . . . . . . . . . . . . . . . . . 17
Instructions for use . . . . . . . . . . . . . . . . 18
Maintenance and care . . . . . . . . . . . . . . 19
Disposal information . . . . . . . . . . . . . . . 21
-Declaration of Conformity . . . . . . . . 21
Exemption from liability . . . . . . . . . . . . . 21
Symbols used in this manual
WARNING!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power tool,
read the operating manual!
Wear goggles!
Protection class II
(completely insulated)
Disposal information for the old
machine (see page 21)!
For your safety
WARNING!
Before using the polisher, please read and
follow:
–
these operating instructions,
–
the “General safety instructions” on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
–
the currently valid site rules and the
regulations for the prevention of
accidents.
This polisher is state-of-the-art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The polisher
may be used only
–
as intended,
–
in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
This hand-operated orbital polisher is
designed
– is designed for industrial applications,
– for all types of polishing work, e.g. paint-
work on vehicles, furniture and metal
surfaces, etc. with polishing sponge,
lambswool and wool pads,
– for use with polishing tools which are
permitted to run at a speed of at least
500 r.p.m.
