●
●
●
●
2.3 Intended and improper use
The PROFESSIONAL LAMINATOR WITH HEATED UPPER ROLLER is uniquely designed for:
Cold adhesive film lamination of prints on various types of paper (for example inkjet printers, electrostatic printers,
offset printers or photographic printers).
The laying of double-sided adhesive film on various types of printed or non-printed supports.
The laying of double-sided adhesive film directly on various types of panels (for example: wood, plastic, foam-board).
The mounting of prints (for example from inkjet printers, electrostatic printers, offset printers, photographic printers) on
various types of panels (for example: wood, plastic, foam-board).
This machine is only suitable for cold lamination.
The dimensions, material and weight of the machinable products are reported in the technical data.
Cold lamination is intended as when the roller temperature does not exceed 50°C.
Danger
The machine has not been designed to operate in potentially explosive areas.
Warning
The machine must only be used for the purposes for which it was designed and built and as established in the contract.
Warning
The machine must be used protected from weathering (for example: rain, hail, snow, fog) and only in industrial/craft
environments.
In case of malfunction, failure, breakage etc., always consult this manual before working on the machine. Contact
FLEXA S.r.l. when necessary.
Do not use the machine with products that are of a size or raw material differing from those for which it has been built
and defined in the contract.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
14
Summary of Contents for CWT GALAXY
Page 2: ......
Page 93: ......
Page 94: ...FLEXA Sr l reserves the right to make technical changes to this manual without prior notice...
