Installation, Operation, & Maintainance Guide
Style RKCS/D
RKCS VERSION C SINGLE CARTRIDGE SEAL - QUENCH SEAL SUPPORT SYSTEM INSTALLATION
The following steps briefly describe the methods in which a quench system should be set up to support the
RKCS Version C with an outboard lip-seal and fluid guide sleeve.
1
. For quench operation, connect a suitable liquid quench supply to the quench port.
• For typical applications, Flexaseal recommends throttling the liquid quench to 1/4 gallon per minute.
Consult Flexaseal for specific applications and details.
Use thread sealant instead of thread tape. Thread tape has been known to break apart and
enter the quench fluid stream, resulting in damage to and premature failure of the
mechanical seal.
Ensure that all tubing/piping is free of pipe strain, which can adversely affect the seal.
Figure 9: RKCS Version C Single Cartridge Seal for Quench Operation
Page 6 of 10
