Caption: Device mounted facing forward on the pole
Caption: Device mounted facing forward inside the
tensioner
b.
If using a pole adapter (replacement part 91597) or pole extender (replacement part 91595
or 91596), then affix the device so the body clamps only to the adapter or extender. The
device body cannot sit half on a pole extender and half on the cleaner pole.
c.
Using a T40 6-lobe (Torx) driver, tighten one screw on opposite sides of the top cap, and
then tighten the remaining screws. Do not exceed 72 in-lbs (8.1 Nm) torque.