A visual inspection of the cleaner can indicate underlying issues with the device. Reference the
appropriate cleaner maintenance manual to correct all operating abnormalities.
Inspect the devices for cracks, missing screws or deformities as these situations can impact the
collection of data or short circuit the entire device.
Press the right information button on the keypad. The Connectivity LED will light green if it is
connected to cellular service; the Wrench icon will light green if the conveyor information has
been entered; and the battery LED will indicate approximate remaining battery life.
Connect to the device via Bluetooth® wireless communication and view the same battery life
and cellular connectivity information on the mobile application. Note in the application that you
performed an inspection.
Mobile application may take 2-3 minutes to populate previously entered cleaner profile
information in the mobile application depending on cellular service strength. If the Wrench LED
is green, then the device has cleaner profile information.
Use the dashboard to remotely monitor the status of the device and the cleaner.
6.2 Battery Replacement
Batteries must be routinely replaced to power the device. Battery life is highly dependent on the
temperature and can range between 3 months to 12 months with Flexco recommended configuration.
