Section 3 – Pre-Installation Checks and Options
3.1 Checklist
Necessary tools: T40 and T20 6-lobe (Torx) drive bits or wrench, Android or iOS smartphone or
tablet with Bluetooth® wireless communication, installed BRAND NAME mobile application
Necessary preparation data: site name, conveyor names, belt speed, material being conveyed,
tonnage, splice type (mechanical or vulcanized) and number of splices
If possible, discard packaging before going to the installation location (peripheral packaging on
site is a safety hazard)
Ensure that the correct device model was received—regions are specified by the following part
numbers on the back panel label:
Part numbers assigned to the region of installation
o
United States: 91600
o
Australia: 91602
o
Europe & Canada: 91601
Check the device for damage and missing parts
Prepare the device for installation:
o
Loosen the screws so the top cap is loosely connected to the body
o
Remove the cellophane wrap over the keypad
Identify and note where the devices will be installed
Prepare the conveyor site:
o
Adjust the spring, bolt or air tensioner to its recommended tension level
o
Clean the end of the pole to remove dirt and debris
3.2 Device Setup
Before going to the installation site, power on each device to ensure it connects to the local
cellular provider (you must be in the same country as the installation site)
Power on each device and wait for the Connectivity LED to display solid green
In the event that the Connectivity LED turns red, then turn off/on the device for a second
attempt, after which refer to section 7.
Power off the device when finished
3.3 Mobile Application Setup
The mobile application setup process will be initiated and managed by Flexco. Flexco will
request email addresses for authorized application users, and each mobile application user will
receive a unique download link with setup instructions.
The mobile application is only available via unique link emailed to the authorized users.
Downloads are not available through the Apple App or Google Play stores.
The mobile application requires Android or iOS operating system and Bluetooth® wireless
communication capability.
3.4 Optional Installation Accessories
