SA
-FOM4 Installation Description
SA
-FOM4-2.0-20030102
5.6 Set E1 Local Loopback
Please enter a selection [0-9]: 3
Key in
3
and press the
Enter
Do you want to enter MAINTENANCE Status <Y/N<any key>>? Y
Y
or
y
DO NOT
press
Enter
after Y or y is pressed at this
Please enter Channel(s) no to set E1 Local Loopback: 2 4
and the numbers can be entered at any order.
Once the E1 channel(s) are set to Local Loopback, the
STATUS LOS MAJ MIN
OOS
V
OOS
OOS
V
OOS
key at the prompt “Please enter
a selection:” under main menu. The following prompt
appears:
If user is sure to perform the loopback press
at the
prompt (
prompt). Otherwise, press any key to return to the main
menu.
Enter the E1 Channel Number(s) that user wishes to perform
the Local Loopback. Four channels can be set at one time
corresponding E1 LEDs blink red.
A system report appears first shows the E1 channels 2 and 4
are performing Local Loopback.
SA
-FOM4 system report
E1LLB NELLB E1RLB E1RLBed
Channel_2
Channel_3
Channel_4
Optical_1
-14-
Summary of Contents for SA-FOM4
Page 2: ......
