FlexiForce CE-FLH, User Manual

manual

FF-MANUAL CE-LHR /3                             WWW.FLEXIFORCE.COM 

GB 

GUARANTEE, CONDITIONS AND TERMS 

The general terms and conditions of delivery and payment issued by the Metaalunie and designated as 

METAALUNIE CONDITIONS are fully applicable to all our quotations, contracts and their implementation. 
We expressly reject all other terms and conditions. On request we will send you a copy of these terms and 

conditions free of charge. A copy may also be downloaded from our website 

www.flexiforce.nl

. 

Flexi-Force strives to deliver 100 % in conformance with the order. In practice, in spite of all our controls, this is 

not always possible. However we will rectify any errors as quickly as possible, in order to minimise the 
inconvenience caused to you or the user. As such, it is important that you inform us as soon as possible about 

any problem with the delivery (include the order number and week of production) and give us the opportunity to 

offer a suitable solution. 

Flexi-Force will only reimburse third party costs if we have given explicit permission for this in advance. The 
reimbursement is based on normal rates and travelling expenses over distances of 1 hour away at most. 

For large-scale projects we strongly advise you to first install 1 door completely before installing the other doors. 

In this way, any errors can be detected early on and rectified comparatively cheaply.  

This manual does not confer any rights. Technical modifications may be made without written notice.  
Flexi-Force has endeavoured to design and put together this hardware set in conformance with the applicable 

CE-norms. However, we recommend to check our configuration against  any local national specification. 

Flexi-Force B.V., P.O. Box 37, 3770 AA  Barneveld, The Netherlands 

Tel. +31-(0)342-427777, ff@flexiforce.nl 

APPLICABLE CE DIRECTIVES AND RESTRICTIONS:  

Industrial overhead doors brought into the European market must follow the EMC-Directive*, Low Voltage 
Directive*, Machine Directive* and Construction Products Directive, issued by CEN.  

(* = only power-operated doors) 

Flexi-Force has developed and constructed this hardware set according to these directives. This gives a 

restriction to the max. forces and dimensions of industrial doors: 
 

•

Max width 

: 5 meter 

•

Max height 

: 5 meter 

•

Max door weight  : 300 kg 

•

Standard  equipped  with  anti-drop  protection:  Cable  break  device a nd  spring  breaking 

device 

•

Other safety accessories:  roller  protection,  bottom  safety edge system (whe n  power 

operated), slack cable device, cable inside track system. 

•

Tested  for CE  when  selecting the proper  Flexi-Force  components, and c ombining  with 

tested panels and operator/control unit combinations. 

•

Use of finger safe sections for door heights <2,75m. 

•

Cables outside the track system are not allowed, unless the cables are covered. 

Flexi-Force has applied the mandated INITIAL TYPE TESTING for doors described in this manual, at 

the SP-Institute in Sweden (as Notified Body Nr. 0402). The INITIAL TYPE TESTING REPORT that 

has been rewarded, can be transferred to the door producing company when truly declared 

conformity is done. This is needed to complete your CE technical construction file according to 

product standard EN13241-1. The ITTR-number should be placed on the CE-plate on the door. 

The article codes of the parts are given in (parentheses). This door can only be installed according to the 
CE-certificate if all parts are according to the parts lists of the SP-certificate. See 

www.flexiforce.com

.  

This manual should be completed with additional installation manuals for IND Hardware sets, cable break 
devices, spring break devices and E-operator.