background image

Item No. E24/E24B

Specifications

Max. Loading Capacity         165 lbs (75 kg) in total

Adjustable Height                  0 - 24.4'' (0 - 620 mm)

Working Temperature            32° - 104°F (0 - 40°C)

Suggested Ceiling Height     9' or above

Fleximounts Limited Warranty

This limited warranty offered by Fleximounts covers defects in material or workmanship in new Fleximounts 
products. This warranty extends to the original purchaser only and is non-transferable. Only consumers purchasing 
Fleximountsproducts from authorized Fleximounts retailers or resellers may benefit from our limited warranty.

What is Covered?

The Fleximounts limited warranty

 

covers our products against defects in material or workmanship as follows:

Fleximounts Motorized Lift Wall Shelves
All electric garage racks purchased on or January 1, 2018 include a 

5-year

 warranty for the mechanisms, and

 3-year

 

warranty for the motor.

What are your Remedies?

Fleximounts will replace at no charge to the consumer the defective parts only or, at Fleximounts's option, replace 
any product or part of the product that is defective because of improper workmanship and/or material, under normal 
installation, use, service and maintenance. If Fleximounts is unable to provide a replacement and repair is not 
practical or cannot be completed in a timely fashion, Fleximounts may elect to refund the purchase price in 
exchange for the return of the product. In the rare event that your Fleximounts product is defective, we will provide 
you with a replacement item shipped at no cost to you within the continental United States. The shipping method for 
replacement products is FedEx Ground, but expedited shipping is available if you choose to pay the additional 
expense. In addition, you will need to pay the shipping costs if any products need to be shipped to you at an 
address outside the continental United States

.

REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS 
PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. FlEXIMOUNTS
NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY OTHER OBLIGATION OR 
LIABILITY IN CONNECTION WITH THIS PRODUCT.

What Is Not Covered?

Our limited warranty does not cover any problem that is caused by:
1.  Conditions, malfunctions or damage not resulting from defects in material or workmanship.
2.  Conditions, malfunctions or damage resulting from normal wear and tear, improper installation, improper 
maintenance, misuse, abuse, negligence, accident or alteration.
3.  Accessories, connected materials and products, or related products not manufactured by Fleximounts.
4.  Conditions, malfunctions or damage resulting from failure to follow the instructions and guidelines relating to the 
product's intended use.
Our limited warranty

 

is void if a product is returned with removed, damaged or tampered labels or any alterations 

(including removal of any component or external cover).

How to File a Claim?

In order to receive the benefit of our limited warranty, you need to process your claim in compliance with the terms 
of this

 

limited warranty and follow proper return procedure. To request warranty service, please contact customer 

service via email at contact@Fleximounts.comor toll free at 855-421-2808. You will need to provide the sales receipt 
or other evidence of the date and place of purchase for your Fleximounts product.

Implied Warranties and Limitation of Damages
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES (INCLUDING 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) SHALL BE LIMITED IN 
DURATION TO THE DURATION OF THIS WARRANTY, AND FLEXISPOT SHALL NOT BE LIABLE FOR ANY 
INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO 
LOSS OF PROFITS OR REVENUE, RESULTING FROM ANY BREACH OF EXPRESS OR IMPLIED WARRANTY 
OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, EVEN IF FLEXIMOUNTS HAS BEEN ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGES.

Some jurisdictions do not allow limitations on the duration of an implied warranty or the exclusion or limitation of 
special, indirect, incidental or consequential damages, so the above limitations or exclusions may not apply to you.

Governing Law

This Warranty shall be governed by the laws of the State of California, USA, without giving effect to any conflict of 
laws principles that may provide the application of the law of another jurisdiction.

How State Law Applies

This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

 

  

FlexiMounts. com

Summary of Contents for E24B







Reviews: