Flexit 115996, Manual

23

R O O M I E   W I F I

Ventilation unit operation with the mobile appli-

cation 

To enable operation of the unit with a mobile device 

install the 

Flexit Roomie

 application to your mobile 

device. The application is available for download at 

App 

Store and Play Market

. 

7XUQXQLWRQR΍

Selection of pre-set speed. Low, medium, high speed respectfully. 

Manual speed setup. To activate the scroll bar check it. 

Ventilation mode.  

Roomie One WiFi. 

The ventilation unit operates in supply or extract mode at 

set speed. The fan rotation direction depends on PC setting (exhaust mode by 

default). 

Roomie Dual WiFi

. One of the fans of the ventilation unit operates in exhaust 

PRGHDQGWKHRWKHURQHRSHUDWHVLQWKHVXSSO\PRGHDWVHWVSHHG7KHDLUȵRZ

direction remains constant. 

Regeneration mode. 

The fan rotation direction changes every 70 seconds. This mode enables heat 

recovery.  

Supply mode. 

The ventilation unit operates exclusively in supply mode.

Night mode: 

low speed timer activation, by default for 8 hours. The timer setting 

is set during unit setup via a PC or the mobile application. 

Party mode:

 high speed timer activation, by default for 4 hours. The timer setting 

is set during unit setup via a PC or the mobile application. 

Current type of connection to the ventilation unit.  

Home connection or connection via a cloud server through Internet respectively.

Your mobile device must have the operation system 

matching the following parameters:  

•  Version 7 or later for iOS. Compatible with iPhone, 

iPad, iPod.

• Version 4 or later for Android. 

After installation of the application turn the unit on and 

connect your mobile device to a wireless access point. 

Start the application for operation of the unit at your 

mobile device. Detailed description of the connection to 

WiFi read at page 141 and 146. 

WiFi connection indicator.
High speed activation indicator. It goes on after activation of any sensor. This mode has higher priority as compared to the Party timer or 

1LJKWWLPHUPRGH:KHQWKLVPRGHLVDFWLYDWHGDOOWKHRWKHUPRGHVDUHGHDFWLYDWHG8SRQHODSVHRIWKHWXUQR΍GHOD\WLPHUFRXQWGRZQ

(from 0 up to 24 hours, factory setting 30 minutes) the ventilation unit reverts to the previous mode. Press Power to deactivate this  

operation mode.  

Humidity indicator. It glows if the indoor humidity is above the set point. 

Indicator of external relay sensor. It glows if the external relay sensor is activated. 

Indicator of external analogue sensor 0-10 V. It glows if a set value of the external sensor is exceeded. 

Emergency shutdown indicator. It glows in emergency case.  

ΖQGLFDWRUEXWWRQIRUUHVHWWLQJWKHȴOWHUWLPHUΖWJORZVDIWHUGD\VRIQRQVWRSRSHUDWLRQRIWKHXQLW3UHVVLQJWKHEXWWRQZLOOUHVHWWKH

ȴOWHUWLPHURIWKH0DVWHUXQLWRQO\$OOWKHXQLWVDUHHTXLSSHGZLWKDQRQYRWDOLWHȴOWHUWLPHU7RUHVHWWKHȴOWHUWLPHURIWKH6ODYHXQLWVVHW

the DIP switch 3 to a respective position or use a downloaded program at your PC.