10
Installation
The cleaning cover is easily installed by being turned at
the same time as it is pressed on.
The cleaning cover is easily removed by being turned at
WKHVDPHWLPHDVLWLVSXOOHGR
Care
Cleaning covers normally do not require cleaning or
maintenance. They should however, as they are in the
duct system, be cleaned when the system is cleaned.
Installation
The cover can either be installed by simply pushing it
into position.
ΖIWKHUHLVKRZHYHUDULVNWKDWLWFDQEHIRUFHGRLHE\
overpressure), then it should be held in place by two
suitable pop rivets. Carry this out as described below.
Lead the cover into the correct position. Make sure it is
all the way in and is even.
Mark out the holes for the pop rivets.
Remove the cover and drill the holes for the rivets.
Attach the rivets so they stick out through the holes.
$bUHFRPPHQGHGSUHVVXUHWLJKWSRSULYHWKDV
IRUbH[DPSOHDQGOHQJWKPP
Press the cover on so the rivets enter the slot and then
turn clockwise so that it snaps into place.
