8
K 2 . 1
2. Installation
Flexit K2.1 is designed for installation in the kitchen
above cookers with 3-4 hotplates, see Fig. 2. The unit is
supplied in left and right-hand versions depending on
what suits duct locations best (see cahp. ”4.3. Nipple
location” at page 12).
The unit must be wall-hung from a mounting bracket
(Fig. 2) at the top using the enclosed screws. It must also
be screwed to the wall at the bottom edge of the unit.
Remove 2 plastic plugs to access the mounting holes.
For secure mounting, it is necessary to use extra nailing
strips (noggins). The location of these is shown in Fig. 3.
NB!
The wall must have good sound insulation, see
chap. ”1.4. Recommended sound attenuation for wall-
mounting” at page 7.
7KHZDOOPXVWEHFRPSOHWHO\ȵDWEHKLQGWKHYHQWLODWLRQ
unit. If the kitchen hood area is tiled, a suitable liner
plate must be mounted behind the unit. The distance
EHWZHHQWKHERWWRPRIWKHJUHDVHȴOWHUDQGWKHFRRNHU
should be at least 50 cm for electric cookers and 65 cm
for gas cookers. For the external dimensions of the unit,
see the dimensioned drawing in chap. ”6. Dimensioned
drawings” at page 14.
A
1
2
3
3
1
2
)LJ
1. Mount the two sides.
2. Attach the two angles.
)L[WKHJODVVSURȴOH
)LJ
40 mm
720 mm
spikerslag
gips
steinull
ȴ[LQJWRSHGJH
ȴ[LQJ
ORZHU
HGJH
2.1. INSTALLING THE VOLUME HOOD
)LJ
min 600 mm
min 500(650) mm
5HFRPPHQGHG
500mm*
PLQUHTPPIRUJDVFRRNHUV
0LQUHTPP
VWXGV
URFNZRRO
J\SVXP
