contact@webdyn.com |
webdyn.com
V1.03 subject to changes | Webdyn © by Flexitron Group
7
Safety Requirements and Protection
Regulations
Please read the information in this section before starting your integration work!
1. Safety Instructions
PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A COPY OF THEM.
• MTX-StarEnergy-E, for any type of operation, is only accessible for instructed and skilled
installers, testers and technical engineers.
• Before any type of handling of MTX-StarEnergy-E LTE modem, it must be ensured that it has
been de-energized to allow for electrical work to be carried out and it cannot be inadvertently
re-energized. Refer to INSTALLATION. chapter for more details.
• Always ensure that use of the modem is permitted. The modem may present a hazard if used
in proximity to personal electronic medical devices. As a rule, the modem must not be used in
hospitals, airports or planes.
• This equipment is not suitable for use in locations where children are likely to be present.
• Never use the device at a gas station, refuelling point, blasting area or in any other environment
where explosives may be present.
• Operating the device close to other electronic devices, such as antennas, television sets, and
radios may cause electromagnetic interference.
• This product is intended to be used with the antenna or other radiating element at least 20cm
away from any part of the human body. In applications where this rule cannot be applied,
the application designer is responsible for providing the SAR measurement test report and
declaration.
• You are responsible for observing your country’s safety standards, and where applicable, the
relevant wiring rules.
