16
GATEWAY SPECIFICATION - WebdynPulse
WebdynPulse – Gateway specification - Version 2.0
FTP_DirCmd
FTP directory name for
command files
(up to 29 characters)
/CMD
X
FTP_Option
Enable/Disable of two-phase
data uploading. (File with
extension “.tmp” uploaded,
then extension “.tmp” deleted
after transfer.
0=Disabled
1=Enabled
0
X
CONFIG_ForceUpload
Allow overwriting
configuration and definition
files on the server if a local
change is performed to a file
parameters concerned:
0 = Off
1 = Enabled
1
X
WebService_Enable
Enable/Disable of web
services:
0= Disabled
1= Enabled
0
X
WebService_Url
Web Service http:// address
(up to 29 characters)
X
Language
Language chosen for built-in
website:
fr = French
en= English
fr
X
These variables can be modified at any time on the remote server.
To ensure consistency between the server and the unit, it is advisable to delete the
unit’s configuration file
prefixID
_config.ini from the remote server as soon as any local
modification is carried out. This must be done before connecting, so that the gateway
can upload its new
prefixID
_config.ini configuration file.
6.2.1 Configuration via the built-in Web server
Access to the built-in Web interface on the WebdynPulse gateway is provided via the gateway’s LAN
connection. As the gateway does not cross Ethernet signals, when there is a direct connection
between the gateway and the computer, a crossover cable must be used. In addition, both the
computer used and the gateway must belong to the same subnet. If the WebdynPulse gateway has a
static IP address (the default situation), the computer must also be configured to use a compatible
static IP address.
This static address must belong to the same subnet as the WebdynPulse gateway.
