19
GATEWAY SPECIFICATION - WebdynPulse
WebdynPulse – Gateway specification - Version 2.0
Choosing the language:
Selection the Web interface language from the popup menu.
This field corresponds to the variable “Language” in the configuration file
prefixID
_config.ini.
Gateway identifier:
This field corresponds to the variable “ID” in the configuration file
prefixID
_config.ini. The
value of this variable enables identification of the gateway when interacting with the FTP
server. The names of the files available on the server will be prefixed with the value of this
variable, so as to link them to the gateway (i.e. the site) concerned.
There are two ways of configuring the gateway identifier:
•
Manually, in the
ID
field (by default “ID=WDXXXXXX” where XXXXXX is the last six digits of the
MAC address).
•
Automatically, by ticking the
Automatic mode
checkbox and leaving the
ID
field empty
(“ID= “). For this option, Web Services must be enabled. The gateway will pick up its identifier
just before the initial connection to the FTP server. The ID will be filled in with the value
