Room longer than 10 feet
1. Do a small detour to break up the cable run.
2. Ensure the chosen spacing is respected all around.
3. Change direction if you need more flexibility to get closer to the wall.
Installation with two cables
1. End the installation of the first cable by the wall, so that the second cable
nestles in easily.
Proper spacing to walls and fi xed objects
1. Change directions so the cable can be installed to the closest spacing
allowed from walls and fixed furniture.
Bathroom example
1. Buffer zones.
2. Change direction because the cable is too close to the podium.
Securing the cable to the mesh
Install the cable to the mesh in a winding path manner, using the FLEXTHERM
adhesive tape. The required amount of adhesive tape is included in your kit.
Fasten the cable with the adhesive tape as the work progresses, always
respecting the pre-determined spacing. To do so, wind the tape around the
cable and the mesh in a spiral fashion (
picture 6
).
Picture 6
5
Green Cable
Concrete
Installation Guide
