Connections
1. Fuse
FL250: ensure a 20 amp fuse is fitted, never fit a fuse with a rating higher than 20 amps.
FL500: ensure a 25 amp fuse is fitted, never fit a fuse with a rating higher than 25 amps.
2. Power connections
Power cable
At least an 10 gauge cable should be used for both the power and the ground connections to the
amplifier.The power cable should be taken directly from the battery. Rubber grommets should be
used when passing through any bulkheads to prevent the cable from becoming chaffed
ff
or cut.
It is vital that a fuse / circuit breaker (of at least equal value to the one fitted on the amplifier) is
placed inline with the power cable and is no further than eighteen inches away from the battery.
Please ensure that the fuse isn’t fitted until the entire installation procedure is complete.
FL250:
FLI TRAP 10 active
FLI TRAP 10 active pink
FLI TRAP 12 active
FL500:
FLI TRAP 12 twin active
5
Summary of Contents for TRAP 10A
Page 1: ...trap active enclosures www fliaudio com Models TRAP 10A 10AP 12A 12TA ...
Page 9: ...notes ...
Page 10: ...notes ...
