background image

DAPS440


11

  

Revision E, December 2009

 

Warranty Information 

Flight Display Systems warrants the DAPS440 against material or manufacturing 
defects for a *two-year period (effective 1/1/2009 on all equipment shipped with 
2009 pricing). Warranty begins on date of installation. *The warranty registration 
card must be returned upon installation in order to validate the two-year 
warranty. Any warranty registration not returned during this time period will 
default to the date of purchase as the warranty start date. 

If product support is required, please call our Technical Support team at 678-
867-6717 to obtain assistance. If the return of the unit to the factory is required, 
an RMA number will be issued at that time. Flight Display Systems will, upon 
receipt of the failed hardware, remanufacture or replace the unit at our 
discretion.   

Flight Display Systems will pay Ground Shipping charges for warranted items. 
Charges for express shipment will be the responsibility of the sender. 

This warranty is not transferable. Any implied warranties expire at the expiration 
date of this warranty. We shall not be liable for incidental or consequential 
damages. 

This warranty does not cover a defect or failure that has resulted from improper 
or unreasonable installation, use or maintenance, as determined by Flight 
Display Systems. This warranty is void if there is any attempt to disassemble or 
open this product without factory authorization. 

Any labor charges associated with the removal of product or related 
troubleshooting by a firm other than Flight Display Systems or its designee will 
not be covered. 

All manuals and user guides at all-guides.com

Summary of Contents for DAPS440














Reviews: