Rev:
C
Revision Date:
09/04/2012
Page 10 of 16
MAN
– FD104SMT
Operation Instructions
The FD104SMT is continuously on but can be de-energized by removing power from
the entertainment system. No pilot or aircrew action is necessary during flight or
ground operation. It is necessary to stow the display during take-off and landing.
The passengers will be able to change the video output on the FD104SMT using the
video source select button on the display, or remotely throughout the cabin with the
included IR remote. Point the IR remote at the top of the LCD to make changes.
When applying 28VDC power, the display will turn on and look for a valid input on the
last known source. If no input is found, the display will go to standby mode. Pressing
the Select button will select new video input.
Button
Located at the top of the FD104CV LCD are seven buttons.
Operations are as follows (From Right to Left):
BUTTON DESCRIPTION
Power Used to turn the unit on or off.
(LED)
Right
Used to move through the menu options.
Left
Used to move through the menu options.
Up
Used to increase the adjustment of a menu option.
Down
Used to decrease the adjustment of a menu option.
Select Used to select the input signal source.
Menu
Used to change the configuration of the picture
settings (Backlight, Brightness, Contrast, Saturation,
Hue, etc.)
All manuals and user guides at all-guides.com
